What to do if the starter does not function on my Kubota Lawn Mower?
If the starter on your Kubota Lawn Mower does not function, it could be due to an overused battery, so charge the battery sufficiently. A poor terminal connection can also cause this, so clean the terminal and tighten it securely. If the battery life has expired, renew the battery.
Why does my Kubota Lawn Mower engine stop suddenly?
If your Kubota Lawn Mower engine stops suddenly, it could be due to insufficient fuel. Refuel the mower and check the fuel valve and carburetor fuel valve positions.
What causes an uneven cut with my Kubota ZG327A-AU Lawn Mower?
An uneven cut with your Kubota Lawn Mower can be caused by several factors. The mower deck might not be level, so level the mower deck. Operating at a ground speed that is too fast can also cause this, so slow down. Dull or damaged blades can be a factor, so sharpen or replace the blades. Also, low tire inflation can cause an uneven cut, so add air to correct pressure. Finally, make sure the anti-scalp rollers are adjusted correctly.
What causes the discharge chute to plug on my Kubota ZG327A-AU Lawn Mower?
If the discharge chute is plugged on your Kubota Lawn Mower, it could be because the grass is too wet, so wait for the grass to dry. If the grass is too long, raise the cutting height and cut the grass twice. Also, make sure you are not cutting too low and raise the cutting height. Ensure the engine rpm is not too low and mow at full throttle. Finally, if the ground speed is too fast, slow down.
What causes excessive vibration in my Kubota ZG327A-AU?
Excessive vibration in your Kubota Lawn Mower can be caused by debris on the mower deck or in the pulleys, so clean the mower deck and pulleys. A damaged mower belt or pulleys can also cause this, so replace them if necessary. Check the pulleys for proper alignment and have the blades balanced.
What causes my Kubota Lawn Mower starter to not function and lights to dim?
If the starter does not function from the beginning and the lights soon become dim on your Kubota Lawn Mower, it is likely due to insufficient charging. Charge the battery sufficiently.
Why are the blades on my Kubota ZG327A-AU scalping the grass?
If the blades on your Kubota Lawn Mower are scalping the grass, the cutting height may be too low, so raise the cutting height. Reducing speed on turns can also help. If there are ridges in the terrain, change the mowing pattern. For rough or uneven terrain, adjust the wheels pressure and anti-scalp rollers. Also, check for bent blades and replace them if necessary.
Why is my Kubota ZG327A-AU leaving streaks of uncut grass?
If your Kubota Lawn Mower is leaving streaks of uncut grass, it could be because the ground speed is too fast, so slow down. Also, make sure the engine rpm is not too low and mow at full throttle, checking and resetting the engine rpm. If the grass is too long, cut it twice. Dull or damaged blades can also cause this, so replace or sharpen the blades. Finally, check for debris in the mower deck and clean it.
What causes mower belt slipping on my Kubota ZG327A-AU Lawn Mower?
Mower belt slipping on your Kubota Lawn Mower can be caused by a weaken tension spring or a worn mower belt, so replace them if needed. Also, the mower being plugged or debris in the pulleys can cause slipping. Unplug and clean the mower deck and clean any debris from the pulleys.
Why are the exhaust fumes from my Kubota Lawn Mower white or blue?
If the exhaust fumes from your Kubota Lawn Mower are white or blue, it may be due to excessive engine oil. Reduce the oil to the specified level.
General| Brand | Kubota |
|---|---|
| Model | ZG327A-AU |
| Category | Lawn Mower |
| Language | English |
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols used for safety.
General safety checks and precautions before operating the machine.
Safety precautions to prevent accidents involving children.
Precautions for operating the machine on inclines to prevent tip-overs.
Detailed steps for starting the engine safely, including safety interlocks.
A schedule of recommended maintenance tasks based on operating hours.
Routine checks to be performed before each operation for safety and function.
Testing safety interlocks (seat switch, PTO, parking brake) for proper function.
Diagnosing and fixing common engine starting and running problems.
To Next Page
