Why is my Kubota Lawn Mower engine knocking?
If your Kubota Lawn Mower engine is knocking, it could be due to stale or low octane fuel, so use the specified fuel. Another cause could be an overloaded engine, so lower the ground speed or reduce the load. Also, make sure the engine speed is not too low and operate at the "FAST" speed.
What causes mower belt slipping on my Kubota ZG327A-AU Lawn Mower?
Mower belt slipping on your Kubota Lawn Mower can be caused by a weaken tension spring or a worn mower belt, so replace them if needed. Also, the mower being plugged or debris in the pulleys can cause slipping. Unplug and clean the mower deck and clean any debris from the pulleys.
What to do if the starter does not function on my Kubota Lawn Mower?
If the starter on your Kubota Lawn Mower does not function, it could be due to an overused battery, so charge the battery sufficiently. A poor terminal connection can also cause this, so clean the terminal and tighten it securely. If the battery life has expired, renew the battery.
Why is my Kubota ZG327A-AU leaving streaks of uncut grass?
If your Kubota Lawn Mower is leaving streaks of uncut grass, it could be because the ground speed is too fast, so slow down. Also, make sure the engine rpm is not too low and mow at full throttle, checking and resetting the engine rpm. If the grass is too long, cut it twice. Dull or damaged blades can also cause this, so replace or sharpen the blades. Finally, check for debris in the mower deck and clean it.
What causes the machine operation to not be smooth on my Kubota Lawn Mower?
If the machine operation is not smooth on your Kubota Lawn Mower, it could be due to insufficient hydrostatic transmission fluid, so replenish the oil. Also, a clogged filter can cause this, so replace the filter.
Why are the blades on my Kubota ZG327A-AU scalping the grass?
If the blades on your Kubota Lawn Mower are scalping the grass, the cutting height may be too low, so raise the cutting height. Reducing speed on turns can also help. If there are ridges in the terrain, change the mowing pattern. For rough or uneven terrain, adjust the wheels pressure and anti-scalp rollers. Also, check for bent blades and replace them if necessary.
General| Brand | Kubota |
|---|---|
| Model | ZG327A-AU |
| Category | Lawn Mower |
| Language | English |
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols used for safety.
General safety checks and precautions before operating the machine.
Safety precautions to prevent accidents involving children.
Precautions for operating the machine on inclines to prevent tip-overs.
Detailed steps for starting the engine safely, including safety interlocks.
A schedule of recommended maintenance tasks based on operating hours.
Routine checks to be performed before each operation for safety and function.
Testing safety interlocks (seat switch, PTO, parking brake) for proper function.
Diagnosing and fixing common engine starting and running problems.
To Next Page
