AFTER SALES SUPPORT
1300 777 137
10
service@unclebills.com.au
MODEL: KC0238 PRODUCT CODE: 49366 06/2015
Instructions
1. Press the lid release button, the lid will open automatically.
2. Fitting the rotating ring:
The rotating ring must be tted the correct way up as shown in gure 1 below.
Two of the wheel axles are stamped with the word “UP”. This must face upwards when the
ring is correctly tted. If the pot makes excessive noise or fails to rotate properly during use,
make sure that the rotating ring is tted the right way up.
1) Place the rotating ring centrally into the bottom of your Dry Fryer.
2) Place the pot into the body of your Dry Fryer as shown in gure 2 below.
3) Fit the mixing arm onto the spindle in the pot as shown in gure 3 below.
NOTE: The mixing arm centre knob has an image of a padlock with an anti-clockwise arrow. The
knob is already locked in place, unlocking and removing this is purely for cleaning purposes and
has no cooking functionality (refer to the cleaning section on page 16 on how to remove).
3. Mix food with one spoonful of oil evenly (if required) in a separate bowl or container and
then pour into the pot.
Fig 2Fig 1 Fig 3
To Next Page
Loading...
