AFTER SALES SUPPORT
1300 777 137
09
service@unclebills.com.au
MODEL: KC0238 PRODUCT CODE: 49366 06/2015
Getting Started
Before rst use
Prior to using your Dry Fryer, please read all safety and operating instructions thoroughly. Please
ensure you follow the steps below before using this appliance.
1. Remove all packaging materials and literature from inside the gift box.
2. Remove the twist-tie which is securing the electrical cord. Uncoil the cord and straighten it to
remove any kinks.
3. Wipe the exterior housing and inner surface of the Dry Fryer with a damp cloth and then dry
thoroughly. Do not immerse it in water or other liquids.
4. Wash the pot, mixing arm, grill rack and handles in warm soapy water and let it soak for 30
minutes. Then rinse and dry thoroughly.
5. Attach the mixing arm handle to the mixing arm by pushing it rmly into the hole in the
mixing arm until it clicks. Once assembled, do not try to remove the handle from the mixing
arm otherwise it may be damaged.
6. Select a at, stable, dry surface to operate your Dry Fryer.
NOTE: The Dry Fryer may emit a slight burning smell when it is rst being used. Do not be
alarmed, this is normal and will cease with continued use.
To Next Page
Loading...
