Dispensing hot water
The hot water function is useful for turning an espresso into a long black (Fig.8),
or for making any other drink that requires hot water.
• Place a cup under the steam nozzle.
• Turn the function dial to the position.
• When you have collected enough hot water, turn the function dial to its neutral
position to switch the pump off.
Dispensing steam
The steam function is designed to dispense steam for heating up and texturing
milk for a cappuccino or caffè latte, or for reheating hot beverages through the
steam nozzle.
• Press the HOT WATER/STEAM selector in so STEAM is selected.
• After a brief heating period, the HEATING indicator light will turn off. Steam
can now be drawn from the steam nozzle by turning the function dial to the
position.
• To ensure that the espresso outlet is safely covered, the porta filter with filter
should be fitted when steam is being dispensed.
Instructions (Cont.)
Fig.8 Fig.9
Reheating beverages
• Press the HOT WATER/STEAM selector in so STEAM is selected.
• Insert the steam nozzle into the liquid to be reheated (Fig. 9), then turn the
function dial to the position.
• Once the liquid has reached the desired temperature, turn the function dial
back to its neutral position.
• When you no longer need steam, release the HOT WATER/STEAM selector.
To Next Page
Loading...