Putting into service
Disc mower
GMD240-280-310
33
KN204AGB H
Preparing the tractor
-
-
The tractor PTO stub must rotate at a speed of 540 min
-1
.
or
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
See section:
- Safety / Safety instructions /
Precautions when driving on public
roads.
- Appendix.
The tractor must be fitted with lower link
stabilizers.
When the following equipment is fitted:
Mechanical safety release
The tractor must be fitted with a single acting
hydraulic outlet with float position.
When the following equipment is fitted:
Mechanical safety release + Hydraulic pivot +
Lighting and signalling
The tractor must be fitted with a double acting
hydraulic outlet.
The tractor must be fitted with a single acting
hydraulic outlet with float position.
To Next Page
Loading...
