Disc mower
46
GMD240-280-310
Instructions for work
KN204AGB H
$Instructions for work
1. Putting the machine into work
position
From the transport position:
- Fully lift tractor lift linkage.
- Activate single acting valve of transport/work
positioning cylinder to lighten pressure on transport
lock.
- Pull on the unlocking cord and maintain to keep the
transport lock open.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
When the following equipment is fitted:
Mechanical safety release + Hydraulic pivot +
Lighting and signalling
When switching into work position, the cutter
bar is lowered and must be fully pivoted
frontwards.
To Next Page
Loading...
