Disc mower
82
GMD240-280-310
Maintenance and storage
KN204AGB H
Knife replacement
Parking
- Clean the top side of the disk guard.
- Clean cavities between disc and spring plate.
- Fully insert special tool between disc and spring plate.
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.
Replace immediately all worn or distorted
knives.
Never straighten a bent knife.
- Always replace both knives per disc.
- Slightly hit all ground residues between
the knife and the screw with a mallet to
remove them.
To Next Page
Loading...
