Disc mower
84
GMD240-280-310
Maintenance and storage
KN204AGB H
- Check that screw head (2) is free to slide in spring
plate hole (3).
- Remove special tool.
- Rotate disk by half a turn.
- Repeat previous tasks.
- Repeat previous tasks on the other disks.
- Press knife upwards and pull it towards
yourself before releasing the special
tool.
• (a), (b), (c).
- Checking the full locking and free
rotation of the knife on the screw head.
After replacing the last knife, check that the
tool has been removed and put away.
To Next Page
Loading...
