To Next Page
J
jim18Sep 8, 2025
What to do if the blower rotates, the beater bar is engaged and the conveyor is working but the product does not come out of my KUHN Farm Equipment?
- FfwestSep 8, 2025
If the blower rotates, the beater bar is engaged, and the conveyor is working, but the product isn't coming out, check the conveyor speed. If it's set to 0, increase it as needed. Also, make sure the product isn't compressed against the bale separators. Decompress the product by slightly opening the hook and briefly reversing the conveyor before moving it forward again. Check the hydraulic pressure (190 bar) and the pump output (45 l/min). The return pressure must be a maximum of 8 bar at the tractor's set engine speed.
General
