How to prevent soil build up in front of the cutterbar on my KUHN Lawn Mower?
Soil build-up in front of the cutterbar on your KUHN Lawn Mower can be caused by too much cutterbar down pressure. Adjust the mowing unit ground pressure. It can also occur in very wet working conditions, so adjust the mowing unit ground pressure and the cutting height.
Why is my KUHN FC3160 TCR Lawn Mower leaving uneven stubble?
Uneven stubble on your KUHN Lawn Mower can occur due to dull or broken knives, so replace them. Ensure knives are installed correctly, with the arrow on the knife's upper face pointing in the disc's rotation direction. Reduce ground speed if it's excessive. Adjust the cutting height and mowing unit ground pressure. If dealing with tangled or down crops, reduce the cutting height and increase the mowing unit ground pressure.
What to do if KUHN Lawn Mower roller is clogging?
Roller clogging in your KUHN Lawn Mower can be caused by a PTO speed that is too low. Check the PTO speed, referring to the decal fitted on the machine. Check the play between rollers and adjust the clearance depending on the crop. If the swath shields are too closed, open them.
Why does my KUHN FC3160 TCR Lawn Mower require too much pull power?
If your KUHN Lawn Mower requires too much pull power, it could be due to too much cutterbar down pressure. Adjust the mowing unit ground pressure to resolve this issue.
How to stop considerable vibrations in KUHN FC3160 TCR?
Considerable vibrations in your KUHN Lawn Mower can be due to issues with the roller parallelism and gap. Adjust the parallelism and gap between the rollers.
How to fix badly shaped windrows with KUHN Lawn Mower?
Badly shaped windrows on your KUHN Lawn Mower can be caused by a PTO speed that is too low. Check the PTO speed, referring to the decal on the machine. Also, the swath shields may be incorrectly adjusted; in this case, adjust both swath shields.
Explanation of symbols used for warnings and information in the manual.
General safety guidelines and precautions for operating the machine.
Identifies the location and explains the meaning of safety decals on the machine.
Details on required safety equipment and recommendations for road transport.
Detailed technical data and specifications of the machine models.
Step-by-step guide for connecting and disconnecting the machine from the tractor.
Step-by-step instructions to move the machine to its transport configuration.
Requirements and regulations for road transport of the machine.
Adjustments to be made to the machine while in its working configuration.
General maintenance procedures for the machine.
General| Brand | KUHN |
|---|---|
| Model | FC3160 TCR |
| Category | Lawn Mower |
| Language | English |
To Next Page
