Mower conditioner
12
FC883RA
Safety
Precautions during manoeuvres
When moving the machine from the transport position to
the working position and vice versa, make sure that
nobody is within the machine pivoting area.
Remote controlled components
Danger of crushing and shearing can exist when
components are operated by hydraulic or pneumatic
controls. Keep away from these danger zones.
Hydro-pneumatic accumulator
A hydro-pneumatic accumulator contains nitrogen under
pressure (risk of suffocation in closed rooms).
Repairs, maintenance or putting into service must only
be carried out by competent persons. Wait for the
accumulator to cool down before handling it. Only use
nitrogen to precharge it.
Depressurize the gaz and oil sides of the hydraulic
accumulator before opening it.
It is strictly forbidden to weld, grind or drill onto a hydro-
pneumatic accumulator.
Make sure that the accumulator and its attachment are
in good condition.
To Next Page
Loading...