Instructions for work
Mower conditioner
FC883RA
51
$INSTRUCTIONS FOR WORK
1. Putting the machine into work
position
From the transport position:
- Raise transport wheels.
- Lift the machine with the tractor's three point linkage H
= 600 mm (2’).
- Energize control box using ON/OFF switch.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
Reverse to position transport wheels for
lifting the machine.
When working on slopes, turn the whole unit,
tractor-machine, in the direction of the slope
before unfolding.
To Next Page
Loading...