Maintenance and storage
Mower conditioner
FC883RA
83
4. Maintenance
Check:
Grouper conveyor belt
Checking the conveyor belt tension:
- Measure dimension (L):
Adjusting the tension:
- Remove bolt (1) and nut (2).
Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait until
all moving parts have come to a complete
stop and apply park brake.
Factory supplied: L = 1502 mm (4’11.13’’).
The conveyor belt stretches during the first hours
of use.
Tension both sides of conveyor belt identically
To Next Page
Loading...