Maintenance and storage
Mower conditioner
FC883RA
73
- Wheel pivot points.
3
- Transport stops and stop pins.
3
- Carrying frame pivot points.
3
- Wheel pivot pin articulations.
3
- Wheel cylinder pivot points.
3
- Pivoting upper hitch articulation.
3
- Pump support articulations.
3
Maintenance
Check:
- Conveyor belt tension.
33
- Hydraulic tank oil level.
3
Replace:
- Hydraulic tank filter cartridge.
33
After the
first 10
hours of use
Every 50
hours
Every 200
hours or at
the end of
the season
Every 2
years
To Next Page
Loading...