Need help?Do you have a question about the KUHN GMD 801 and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | GMD 801 |
| Category | Lawn Mower |
| Language | English |
Defines the intended purpose and limitations for safe operation of the mower.
Outlines fundamental safety practices for machine operation and handling.
Covers essential safety guidelines, operator responsibilities, and hazard awareness.
Details safety procedures for attaching and detaching the machine from the tractor.
Specifies safety precautions related to the PTO shaft connection and operation.
Explains safety measures concerning the machine's hydraulic system and fluid handling.
Provides specific safety advice for maintenance tasks and working with rotating parts.
Instructions for assembling the main chassis to the cutterbar unit.
Steps for connecting the pivoting cylinder to the frame.
Guidance on fitting the compensating suspension rod.
Procedures for assembling frame components, lift bracket, and spring.
Instructions for installing belt shields, covers, and tensioning the belt.
Steps for attaching the outer swath wheel assembly.
Instructions for assembling the safety guards and related components.
Details on installing the safety curtain and outer guard.
Procedure for connecting the break-away latch mechanism.
Guidance on connecting lower links and setting hitch pin positions for tractor compatibility.
Steps for connecting the tractor's top link and hydraulic hoses.
How to set the cutterbar to be parallel to the ground.
Procedures for moving the cutterbar to the vertical transport position.
How to adjust the machine's chassis height for optimal cutting.
Method for adjusting the cutting height by altering the cutterbar tilt angle.
Procedures for adjusting the compensating spring for difficult working conditions.
Basic operational steps, PTO speed, and forward speed recommendations.
Precautions and adjustments for mowing in rough or debris-ridden fields.
Detailed steps for draining and refilling the cutterbar oil.
Method for checking the oil level in the cutterbar.
Procedure for checking and topping up the gearbox oil.
Recommendations for lubricating PTO shafts.
Guidance on greasing various fittings and pivot points.
Procedures for checking and adjusting belt tension and replacement.
Guidelines for inspecting, turning, or replacing worn or damaged knives.
Recommendations for inspecting and replacing securing bolts and nuts.
Clarifies warranty limitations, exclusions, and disclaimers.
To Next Page
