What causes insufficient cutterbar ground clearance in 'headland turn' position for KUHN GMD55 SELECT?
Insufficient cutterbar ground clearance in the 'headland turn' position with your KUHN Lawn Mower can be due to an incorrect tractor lift linkage setting, too long levelling rod adjustment on the tractor 3-point lift, or a lengthened cylinder rod. Shorten the levelling rods on the tractor's 3-point lift and also shorten the cylinder rod.
How to prevent soil build up in front of the cutterbar on a KUHN Lawn Mower?
Soil build up in front of the cutterbar of your KUHN Lawn Mower is often caused by very wet working conditions. Adjust the main frame height with regards to the ground to mitigate this issue.
How to fix uneven stubble with KUHN GMD55 SELECT?
Uneven stubble on your KUHN Lawn Mower can be caused by dull or broken knives, knives not installed correctly, or too low PTO speed. Replace knives that are dull or broken. Ensure the arrow on the knife upper face is pointing in the disc's direction of rotation. Increase the PTO speed to 540 min-1.
Why is the KUHN Lawn Mower having bad ground contour adaptation?
Poor ground contour adaptation with your KUHN Lawn Mower may occur due to an incorrect main frame setting or excessive ground speed. Adjust the main frame height with regards to the ground. Also, reduce ground speed to improve adaptation.
What to do if KUHN GMD55 SELECT Lawn Mower has considerable vibrations?
If your KUHN Lawn Mower is experiencing considerable vibrations, it might be due to a missing nylon plug. Immediately replace the missing cap.
Why does the KUHN GMD55 SELECT have too frequent safety breakback release?
Too frequent safety breakback release on your KUHN Lawn Mower can be caused by insufficient spring washer compression. Increase spring washer compression to resolve this issue.
What to do if KUHN GMD55 SELECT has poor division between cut and uncut crop?
Poor division between cut and uncut crop with your KUHN Lawn Mower can be attributed to tangled and down crops. Check the swath shield retaining spring tension to address this issue.
Visual representation of the machine from the front and rear.
Details about the machine's identification plate for spare parts orders.
Lists available optional equipment for the machine.
Comprehensive technical data, dimensions, weight, power, and sound levels.
Explains safety symbols and provides essential general safety instructions for machine operation.
Covers precautions for driving, coupling, hydraulics, PTO, maintenance, and maneuvers.
Addresses road transport safety, signage, and the meaning of safety decals on the machine.
Guides through coupling, tractor preparation, machine adjustments, and uncoupling procedures.
Covers transitioning between transport and working positions, adjustments, and field operation.
Details available optional equipment like PTO shafts, discs, knives, and shields.
Outlines maintenance intervals, lubrication, oil changes, and component checks.
Procedures for maintaining and replacing knives, discs, and fixing elements.
Guidelines for seasonal storage and a guide to diagnose and resolve common issues.
Details warranty terms, conditions, limitations, and exceptions.
Specifies that the machine conforms to European directives and harmonized standards.
General| Brand | KUHN |
|---|---|
| Model | GMD55 SELECT |
| Category | Lawn Mower |
| Language | English |
To Next Page
