Instructions for work
Disc mower
GMD55 SELECT
35
$Instructions for work
1. Putting the machine into work
position
From the transport position:
- Lift the machine with the tractor's three point linkage.
- Remove lynch pin (1) and pin (2).
- Put compensation system in working position using
pin (2) and lynch pin (1).
- Remove R-clip (2).
- Remove transport lock (1).
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
To Next Page
Loading...
