KUHN GMD33 N User Manual (English)

Questions and Answers:

B
Brian BonillaAug 3, 2025
How to fix uneven stubble with KUHN GMD33 N Lawn Mower?
- D
  Darren AndersonAug 3, 2025
  If you are experiencing uneven stubble with your KUHN Lawn Mower, it could be due to several reasons. First, the machine might be tilted too far forward or backward. You can fix this by adjusting the cutterbar angle. Second, the knives might be dull or broken, in which case you should replace them. Third, check that the knives are installed correctly, ensuring the arrow on the knife's upper face points in the disc's rotation direction. Finally, the PTO speed might be too low; increase it to 540 min-1.
K
Kenneth AcevedoAug 8, 2025
What to do if soil build up in front of the cutterbar of KUHN GMD33 N?
- J
  Jason PerkinsAug 8, 2025
  If soil is building up in front of the cutterbar of your KUHN Lawn Mower, it may be due to very wet working conditions. In this case, adjust the cutterbar ground pressure. It could also be caused by too much cutterbar down pressure.
C
christopher61Aug 13, 2025
Why KUHN Lawn Mower has insufficient cutterbar ground clearance in 'headland turn' position?
- D
  diazlisaAug 13, 2025
  If your KUHN Lawn Mower has insufficient cutterbar ground clearance in the 'headland turn' position, it could be due to an incorrect tractor lift linkage setting. See machine attachment. It may also be caused by too long levelling rod adjustment; shorten the levelling rods.
S
Sherri WhiteAug 18, 2025
Why KUHN Lawn Mower has bad ground contour adaptation?
- S
  Stefanie StarkAug 18, 2025
  If your KUHN Lawn Mower is experiencing bad ground contour adaptation, it could be due to an incorrect main frame setting. Adjust the main frame height with regards to the ground. Alternatively, you might be operating at an excessive ground speed; try reducing your speed.
A
Alexander NavarroAug 23, 2025
Why KUHN Lawn Mower has considerable vibrations?
- A
  Amy WilliamsAug 23, 2025
  If you are experiencing considerable vibrations with your KUHN Lawn Mower, check the condition and presence of the outer disc cone cap. If the cap is missing, replace it immediately.
M
Michael SmallAug 28, 2025
What to do if KUHN GMD33 N has too frequent safety breakback release?
- S
  Sharon ThomasAug 28, 2025
  If the safety breakback on your KUHN Lawn Mower is releasing too frequently, it may be due to insufficient spring compression. Increase the spring compression; see section ’Safety breakback’.