Troubleshooting guide
Baler / wrapper combination
VBP2160 - VBP2190
329
3. Malfunctions
-
Malfunctions can often be eliminated quickly and easily. Before calling Customer Service, refer to the table to
check whether the malfunction is one you can eliminate yourself.
Malfunction messages
The audible signal alerts you to a malfunction. At the same time, a fault message appears on the
terminal display. The fault messages appear in order of their importance. Proceed as follows in
the event of a fault message:
- Stop operation immediately.
- Switch off the PTO shaft of the tractor.
- Switch off the hydraulic system.
- Switch off the electronic control system.
- Switch off the engine of the tractor and remove the ignition key.
- Prevent the tractor and machine from rolling away.
- The fault must be rectified before work is resumed.
This is a hazardous situation which, if not avoided, could result in death or serious injuries.
When the problem is solved, clear the error message and continue operating.
To Next Page
