KUMA K5248 - User interface; Walk Assist Mode

To Next Page

To Previous Page

4.2 User interface

Normal display interface

After the display is turned on, it will display the real-time speed by default. The PAS level is displayed

in the lower right corner of the screen, the Single Trip distance (unit: km) and the Odometer (unit: km)

are displayed in the middle position, and the percentage of battery power is displayed at the top.

Short press “MODE” button to switch the riding data in the main interface (TRIP/ODO,MAX/AVG

Speed)

4.3 Walk Assist Mode

Press and hold the “DOWN” button for 2 seconds to enter the Walk assist mode. The E-bike will travel

at a constant speed of 6km/h.

Walk assist mode interface

Walk Assist function can only be used as pushing the e-bike by hands. Please don’t use this

function when riding.

KUMA BIKES