FNL 27 / 31
A new window opens:
Illustration15: FNL Properties
Hint:
– Please enter a name for communicating later with the PC-application/
OPC-Server. Choose a unique name. We recommend to use a
significant, where you have the possibility to distinguish the different
FNL's
– In the field IP Address, enter the TCP/IP address of the FNL. The IP
address must match with that assigned by the KUNBUS Network
Configurator Tool. Otherwise the DPE Programming Interface or the
OPC Server cannot communicate with the FNL via the symbolic name.
– In the field Timeout, you may set a alive timeout value for network
interruption. If the alive timeout expires, an error message will be
generated by the driver interface of the PC and sent to the superior
application. We recommend to keep the default value of 20.000 ms.
Configure FNL
To Next Page
Loading...
Need help?
General