Kurth Electronic KE7200 - Table of Contents

Operating Manual
KE7200 / KE7100
5
KURTH ELECTRONIC FERNMELDETECHNIK
www.kurthelectronic.de sales@kurthelectronic.de
Table of contents
Introduction ______________________________ 2
Safety Instructions _________________________ 4
Applications: ____________________________ 7
Using the KE7200 / KE7100 ________________10
Keypad __________________________________10
ESC __________________________________ 10
ON/OFF ______________________________ 10
Four arrow buttons ______________________ 10
SEL button ____________________________ 10
Test settings ______________________________10
Wiring (Main menu>Setup>Wiring) __________ 10
Velocity (Main menu>Setup>Velocity) _______ 11
Cable Type (Main menu>Setup>Cable type) __ 11
Device settings (Main menu>Setup>Device Setups) __11
Language _____________________________ 11
Units _________________________________ 11
Battery type ____________________________ 11
Back light _____________________________ 12
Auto Power off _________________________ 12
Key beep ______________________________ 12
Sound ________________________________ 12
Contrast ______________________________ 12
Reset to factory setting ___________________ 12
Program update ________________________ 12
Test settings (Main Menu>Setup>Test Setups) ______12
Cable definition _________________________ 12
Wiring definitions ________________________ 13
Remote ID _____________________________ 13
MAC address __________________________ 13
IP address (Main menu>Setup>IP address) ___ 13