EasyManua.ls Logo

Kurth Electronic KE7200 - Page 9

Kurth Electronic KE7200
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Manual
KE7200 / KE7100
9
KURTH ELECTRONIC FERNMELDETECHNIK
www.kurthelectronic.de sales@kurthelectronic.de
Power supply
4 x UM-3 / AA battery or 4 x rechargeable batteries of the
same size
Battery life with a good quality battery
(such as a GP Super Alkaline or Varta Industrial)
Measurement always with the illuminated display
- Powered on with no testing: approximately 40 hours
- Cable test without remote: approximately 35 hours
- Cable test with remote: approximately 18 hours
- IP test: approximately 15 hours
The available testing time can be extended by turning off
the device or limiting the display lighting time.
Note: Testing is continuous. Different durations may
result with batteries of different quality. Only use
batteries from the same manufacturer with the same
capacity. Remove the batteries if the device will not be
used for a long time. If the battery compartment is
damaged by leaking batteries, it can be exchanged.

Related product manuals