Kurth Electronic KE7200 - Page 8

Operating Manual
KE7200 / KE7100
8
KURTH ELECTRONIC FERNMELDETECHNIK
www.kurthelectronic.de sales@kurthelectronic.de
KE7200 only:
Test active 10/100/1000 Mbit network
- Information about service type
- Static IP or DHCP
- Network scan
- List all found subscribers
- Display name, IP address, MAC address
- Targeted ping of individual addresses
- Display lost responses, min/max/average response times
- Stress test devices by constant ping
- Ping frame size adjustable from 32 to 1024 bytes
Other
- 16 different predefined wiring versions
- Original predefined versions can be created
- Cable types with predefined VP value
- Original cable types can be created
- Illuminated graphical display
- Automatic shutoff time can be set
- Display illumination time can be set
KE7200 only:
- Save the results in the device and PC
- Printout using a PC with the KE Manager software
Remote KE7010 unit
- Active remote unit with microprocessor
- Display of pass/fail with green LED
- Remote ID programmable from 1– 32
- Max. 32 remotes