Kurzweil Forte - Pedals (Optional); Keeping the Forte up to Date; Do You Have Everything

Introducing the Forte
1-3
Pedals (Optional)
As described above, the Forte has ve jacks on the rear panel for optional pedal controllers.
Three jacks for switch pedals, which are typically used to control two-state (i.e., on / off)
parameters such as sustain, sostenuto, and soft.
The remaining two jacks are for continuous control (or CC) pedals typically used to control
multi-state (i.e., “continuous”) parameters such as volume and wah.
Your Kurzweil dealer stocks the following pedals:
• FS-1 Standard single box-shaped switch pedal
• KFP-1 Single piano-style switch pedal
• KFP-2S Double piano-style switch pedal unit (one stereo plug)
• CC-1 Continuous pedal
Keeping the Forte up to date
Be sure to check the Kurzweil Music Systems website at http://www.kurzweil.com for new
documentation and the latest software updates for Forte.
Do You Have Everything?
Your Forte package should contain the following in addition to your instrument:
• Power cable
• Switch pedal
• USB cable (Type-A-to-Type-B)
• 4 self adhesive feet (see page 2-1)
• Forte Getting Started manual
If you don’t have any of these components, please contact your Kurzweil / Young Chang
dealer to get them.