Program Mode
Changing the MIDI Transmit Channel
6-18
Changing the MIDI Transmit Channel
The current MIDI Transmit channel is shown on the right side of the top line of the display.
Press the Channel / Zone Up or Down buttons to change the MIDI Transmit channel. A
different Program can be selected for each MIDI Channel. All channels can be triggered
simultaneously from an external MIDI sequencer or computer. The Aux FX Chains of the
Program on the currently selected MIDI Channel are used for Programs on all Channels.
Pressing both Channel / Zone Up and Down buttons at the same time will reset the current
MIDI Transmit channel to 1.
To Next Page
Loading...
