Program Mode
Parameter Assignments
6-10
Parameter Assignments
In Program Mode, each Program has factory-set Program and Effect parameters assigned
to physical controllers (Sliders, Switch buttons, Mod Wheel, and Pedals). A parameter
assignment can modify an instrument sound during a performance to add variation or
expression. Moving a controller changes the value of the parameter. Any time you do this,
the display shows the Controller name, assigned parameter, and value.
NOTE : Parameter assignments may not be visible if the VIEW soft
button has been pressed, or the “Display” parameter in Global Mode
has been changed.
If you make changes to the current Program using any of the controllers, the Save button’s
LED lights to indicate that a change has been made to that Program. For more information
on the Save button, see “Save User Programs” on page 6-20
To Next Page
Loading...
