Kurzweil K2700 - The Rear Panel

Getting Started
The Rear Panel
11
The Rear Panel
POWER Switch
Power Jack
MIDI IN and OUT Ports
USB Ports
AUDIO OUT LEFT (MONO)
and RIGHT A/B Jacks
AUDIO IN
LEFT and
RIGHT Jacks
LCD Knob
CC1 (VOLUME)
and CC2 Jacks
SW1 (SUSTAIN) and SW2 Jacks
HEADPHONE Jack
POWER Switch
Press the POWER switch to power the K2700 on or o.
Power Jack
Plug the included power cable into the Power jack.
MIDI IN and OUT Ports
Use the MIDI ports to communicate with other MIDI modules and controllers. e OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.
To use the K2700 as a MIDI controller for another sound module, use a MIDI cable to
connect the K2700’s MIDI OUT port to the MIDI input port of the module that you want
to control.
To control the K2700 using another MIDI controller, use a MIDI cable to connect the
K2700’s MIDI IN port to the MIDI output port of the controller that you will be using.