Kurzweil K2700 - Automatic Powersaving

Getting Started
Quick Start
5
Powering On the K2700
1. Power on the K2700 by pressing the POWER button on the right rear panel.
2. If you are using speakers, turn up the volume on your amplier or mixer.
3. Slowly turn up the K2700 VOLUME Slider and play some notes to check the volume
level. (If you have a CC pedal plugged into the CC (VOLUME) jack, make sure it is set
to the maximum volume position.)
4. If you are using speakers and the K2700 is not loud enough, turn up the volume on your
amplier or mixer.
5. If you are using a mixer and hear distortion, reduce the gain level on the mixer, or use
the mixer’s Pad button if it has one (a button that typically decreases the audio input level
by 20 dB).
6. After using the K2700, if you are using speakers, turn the master volume all the way
down on your amplier or mixer before powering o the K2700.
Auditioning K2700 Sounds
1. e K2700 starts up in Program Mode. Use the PREVIOUS and NEXT buttons, Alpha
Wheel, or CATEGORY buttons to select a dierent Program. See K2700 Sounds on
page 15 for more details on selecting Programs or Multis.
1. To hear a Program Demo song for the current Program, press the 0/MISC and KEYPAD
buttons simultaneously.
2. To hear the capabilities of the K2700, you can play the multi-channel demo songs. Press
the USER and 0/MISC buttons simultaneously to listen to a multi-channel demo song.
3. To switch between auditioning Programs or Multis, press the PROGRAM or MULTI
Mode button under the MODE label to the right of the display.
Automatic Power Saving
e K2700 has an automatic power saving feature (Auto Power O) that can automatically
power o the K2700 after a period of inactivity, in order to conserve electricity. e Auto
Power O feature is enabled by default. e default Power O Time is 8 hours, which will
cause the K2700 to power o after 8 hours of inactivity.
A count down timer warning will be shown in the display a few minutes before the K2700
is powered o. At any time, touching any K2700 control or playing a note will cause the
K2700 to remain powered on, until the K2700 has been inactive for the set Power O Time.
Auto Power O can be disabled in Global Mode. e Power O Time can also be adjusted
in Global Mode.