23 24
To turn off the Twin Mode:
Press the [Function/Right] button
Press the Erp On/Off key (Bb0) to turn off the Erp Mode.
The display will show “off” for 3 seconds.
Octave
Pressing this key will set the Data Control knob to increase or decrease the octave setting.
Press the [Function/Right] button to enter Edit Mode.
Press the Octave Key (Ab1).
The LED display will momentarily show:
Voice/Function
Bb0
Use the Data Control knob to select the desired Octave.
Turning the Data Control knob clockwise will raise the keyboard's pitch in octave
increments, and turning it counter-clockwise will lower it in octave increments.
Value:-02~002.
Transpose
Pressing this key will set the Data Control knob to increase or decrease the keyboard's
transpose value.
Press the [Function/Right] button to enter Edit Mode.
Press the Transpose key (F#1).
The LED display will momentarily show:
To Next Page
Loading...
