7 8
Standby
Press the [STANDBY/ON] button to turn on the power and the LCD display will light.
Auto Standby
Your piano will switch o automatically in 30 minutes after no any operation on it. In this
case, press the [STANDBY/ON] button again to turn on the power.
Deactivate Auto Standby Function
Hold the rst white key and rst black key on
the left side of the keyboard at the same time
and then press the [STANDBY/ON] button to
deactivate the Auto Standby function.
Adjusting Volume & Start Playing
The speaker system in the piano is very powerful and can be overpowering in some rooms.
Adjust the [MASTER VOLUME] control to a 12 o'clock position as a safe starting point. You
can adjust the volume at any time even while you are playing.
Now play the keyboard. You should hear the rich tone of the default Grand Piano sound.
Piano Pedals
Just like a regular grand piano, your piano feature 3 foot pedals:
Damper Pedal (Right)
The damper pedal performs the same function as the damper
pedal on an actual acoustic piano, letting you sustain the sound
of the voices even after releasing your ngers from the keys.
Setup Basic Operation
You are no doubt eager to play your new piano instrument, but first please make sure you
have completed the following basic setup steps:
1) Follow the assembly instructions as outlined on page 46 in the appendix of this manual.
2) Once the piano is securely assembled, connect the plug of the foot pedal unit to the
pedal jack on the rear panel.
3) Plug the other end of the power cable into the power outlet.
Note
1. Ensure the piano is turned o when connecting and disconnecting the power.
2. Turn the volume knob to its minimum level before turning on the power.
To Next Page
Loading...
