17
Function Button
Function Button
1. Touch
You can finely tune the pitch of the MARK PRO
ONE i up or down. This function is useful when
you play the RE-110 along with other instrument
that can’t be easily retuned.
While holding down the [Function] button, press
the C#1 or D#1 key to adjust the pitch by steps of
1 cent. The C1 or E1 key adjust the pitch in steps of 5 cents. The tuning range is 64 cents
flat to 64 cents sharp. Because the MARK PRO ONE i does not display the tuned pitch
numerically, you should memorize the setting when you use this function.
2. Tune
Key Tune
C1 -5
C#1 -1
D1
D#1
E1
0
+1
+5
You can adjust how sensitively the keyboard responses to your playing - how the dynamics
of the sounds respond to key velocity. By default, a value of Linear is the standard, unaltered
level of keyboard sensitivity. Values of Light1 - Light3 are for players who prefer a light touch.
You can play more lightly and still get the same attack-velocity values with these settings.
The sensitivity level increases as the numeric number suggests. Values of Hard1 - Hard3 are
for players who have a heavier touch. You should play harder to get the same attack-velocity
values. Also, the numeric number suggests the sensitivity level. Linear is less sensitive than
Light1 and more sensitive than Hard1. The MARK PRO ONE i has 7 levels of the touch
sensitivity. Select the appropriate level for you by pressing one of the C2 ~ F#2 keys while
holding down the [Function] button.
Function
Layer
Metro/Rhythm
Rec
Play/Stop
Voice/Piano
Volume
Function
Layer
Metro/Rhythm
Rec
Play/Stop
Voice/Piano
Function
Layer
Metro/Rhythm
Rec
Play/Stop
Voice/Piano
To Next Page
Loading...
