The MARK PRO ONE i can record and play your musical performances like a tape
recorder. Monitoring your own performance will greatly help you develop your techniques
and musical ears.
3 Ways to start recording
1. Pressing the [Rec] button will put the MARK PRO ONE i in record-ready mode.
When you start to play, the recording will automatically start. To stop the recording,
press the [Play / Stop] button right below the [REC] button.
2. Pressing the [Rec] button will put the MARK PRO ONE i in record-ready mode.
Then press the [Play / Stop] button. This will start the recording. When you play,
your performance will be recorded.
3. Pressing the [Rec] button will put the MARK PRO ONE i in record-ready mode.
Then press the sustain pedal or the sustenuto pedal. This will start the recording.
When you play, your performance will be recorded.
Press the [Play / Stop] button to start playback or to stop it. When the MARK PRO ONE i
is in the recording mode, pressing the [Play / Stop] button will start or stop playback.
If you want to use the metronome while performing, activate the metronome before you
put the MARK PRO ONE i in record-ready mode. For more information about the
metronome, see page 20.
Recording a new performance will erase the previously recorded performance.
You cannot record your performance with the internal rhythm pattern either.
Volume
Function
Layer
Metro/Rhythm
Rec
Play/Stop
Voice/Piano
Volume
Function
Layer
Metro/Rhythm
Rec
Play/Stop
Voice/Piano
Record the harmony parts first, and play the melody part with different voices, or
percussion voices. You can have real fun.
To Next Page
Loading...
