Kurzweil SP6 User Manual

The Rear Panel
POWER Button
8
GETTING STARTED GUIDE
The Rear Panel
POWER Button
Press the POWER button to power the SP6 on or o.
DC Power Jack
Plug the included power adaptor into the DC Power jack.
USB Ports
Use the USB ports to connect the SP6 to a computer/tablet or USB hard drive in order to do
the following:
• Use the SP6 as a MIDI controller to play software instruments on a computer/tablet.
• Use a computer/tablet to sequence multi-channel songs on the SP6.
• Backup and restore User Programs and Multis on a computer/USB hard drive.
• Update the software and sounds of the SP6.
MIDI IN and OUT Ports
Use the MIDI ports to communicate with other MIDI modules and controllers. e OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.
To use the SP6 as a MIDI controller for another sound module, use a MIDI cable to connect
the SP6’s MIDI OUT port to the MIDI input port of the module that you want to control.
To control the SP6 using another MIDI controller, use a MIDI cable to connect the SP6’s
MIDI IN port to the MIDI output port of the controller that you will be using.
SW1 (SUSTAIN) and SW2 Jacks
Use the SW1 (SUSTAIN) and SW2 jacks to connect switch pedals. One switch pedal is
included with the SP6.
In Program Mode, SW1 (SUSTAIN) defaults to controlling sustain, and SW2 defaults to
controlling sostenuto. (For KB3 Organ Programs, SW1 (SUSTAIN) defaults to controlling
the Rotary Speaker speed, changing between fast and slow. is assignment can be changed in
Global Mode. e LCD display shows “KB3” when a KB3 Program is selected.)

Kurzweil SP6 Specifications

General

Pitch wheel	Yes
Product type	Digital synthesizer
Product color	Black, Blue
User presets quantity	1024
Keyboard number of keys	88
Preset programs quantity	256
Maximum polyphony (notes)	128
Display type	LCD
DC input voltage	12 V
Power source type	DC
USB ports quantity	2
6.35 mm (1⁄4-inch) input	1

Weight and Dimensions

Depth	381 mm
Width	1333 mm
Height	146 mm
Weight	12360 g