4-4
Setup Mode
Using A Split Program Setup
1. With the setup 38 Jazz Bass/Piano loaded, press the Edit button on the front panel. This will bring
you to the CH/PROG page of the setup editor (see below.)
2. On the CH/PROG page use the Chan/Layer buttons to the left of the display to select zone 1.
You can view the number of the selected zone in the top right corner of screen. In the Program
field you can view the instrument Program for the current zone. We can see that the program for
zone 1 of this setup is 235 AC Buzzer Bass.
3. From the CH/PROG page, press the KEYVEL soft button on the bottom of the screen. This
brings you to the KEY-VEL page where you can view the key range for the current zone. On the
KEY-VEL page we will adjust the key range for zone 1. You can see that zone 1 is still selected,
displayed in the top right corner of screen (see below.)
4. On the KEY-VEL page for zone 1, use the cursor buttons to highlight the HiKey field. This field
sets the upper limit of the key range for zone 1, which contains the bass program. Let’s make the
upper range of this zone end an octave lower by changing the HiKey field from D#3 to D#2. To do
this, select the HiKey field, hold the Enter button and play D#2 (two octaves below middle
C, which is C4) on the X-Pro’s keyboard (see below.)
Step 3
Step 2
To Next Page
Loading...
