Kuvings AUTO10 User Manual

JUICE
JUICE
Lock
Open
JUICE
09
According to your preference, it is used
for ltering the pulp. Place the pulp
mesh on top of the juice cup as shown
in picture .
0908 Kuvings Hands-Free Slow Juicer AUTO10
02 03
Place the auto hopper onto the juicing bowl
aligning the
sign on the auto hopper with the
unlock mark
on the drum.
04
01
Turn the auto hopper clockwise until the sign
on the auto hopper is lined up with the lock
mark
on the drum.
05
STEP 3
BASE & TOP SET
Completely insert the
juicing strainer into the
rotation wiper.
Once tightened normally,
the rotation wiper will
turn smoothly.
Place a strainer into the
drum ensuring the red
dot on the strainer is
aligned with the red dot
on the drum.
Gently press the screw
into the center of the
strainer.
If the screw is not
completely tightened,
the auto hopper cannot
be fastened.
STEP 1
DRUM SET
STEP 2
DRUM SET & AUTO HOPPER
HOW TO ASSEMBLE
Clamp
06
Place the assembled top set on the base
clamp in an aligned way.
07
Make sure the pulp outlet lock is
assembled.
The pulp outlet lock can be rotated up to
lock or downwards to unlock.
08
Place the pulp cup under the pulp spout
and place the juice cup under the juice
spout as shown in the illustration.

Kuvings AUTO10 Specifications

General

Product	Juicer
Model	AUTO10, KSP-2529CE, KSP-2559CE, KSP-2529CB, KSP-2559CB, KHS-2520CE, KHS-2510CE, KHS-2520CB, KHS-2510CB
Manufacturer	NUC Electronics Co., Ltd.
Type	Low speed compression
Origin	Made in Korea
Voltage	AC220-240V, 50/60Hz
Power Consumption	200W
Maximum Use	Less than 30 min

Weight and Dimensions

Weight	7.2kg
Dimension	210x253x472 mm