How to troubleshoot a Kverneland 150 B Farm Equipment plough that won't turn on?
If your Kverneland Farm Equipment plough isn't turning, it might be due to incorrectly mounted connections to the tractor. Ensure that the quick-couplings are properly engaged and correctly connected, paying attention to the color coding on the hoses.
Why is the first furrow width different on my Kverneland 150 B Farm Equipment plough?
If the first furrow width on your Kverneland Farm Equipment is inconsistent when ploughing on the left and right sides, the issue could stem from a few factors. First, ensure that the cross shaft is positioned centrally on the turning head. Also, verify that the air pressure in the tractor’s rear tires is equal. Finally, check and adjust the sideways leveling.
What to do if turning is slow on my Kverneland 150 B Farm Equipment plough?
If turning is slow or incomplete on your heavy Kverneland Farm Equipment plough, the cause might be incorrect oil flow. Try adjusting the motor speed or flow rate on the tractor valve to see if different oil flow rates affect the turning. Turning valves operate best at 25-35 l/min. A high flow rate can return pressure and lead to reduced turning performance.
What to do if my Kverneland 150 B Farm Equipment plough stops halfway through turning?
If your Kverneland Farm Equipment plough turns halfway and stops, or returns to its original position, it could be due to the restrictor being mounted in the wrong port. Try changing the position of the restrictor. Alternatively, the switching pressure may be incorrect; in this case, try increasing or reducing the switching pressure.
Why does my Kverneland Farm Equipment plough stop turning during the first cycle?
If the turning stops in the first turning cycle with a Kverneland Farm Equipment plough with Packomat, or when turning the plough with the bodies under the main frame, it could be that the switch-over takes place prematurely, just before dead center is reached. Increase the switching pressure by a couple of turns clockwise and ensure that the restrictor in the turning cylinder is correctly positioned.
Why is my Kverneland 150 B Farm Equipment plough vibrating during turning?
If you are experiencing vibrations during turning with your Kverneland Farm Equipment plough, the restrictor might be mounted in the wrong port. Try changing its position to resolve the issue.
Why does the turning cylinder creep on my Kverneland 150 B Farm Equipment plough?
If the turning or folding-in cylinder creeps during ploughing or transport with your Kverneland Farm Equipment plough, it could be because the turning phase isn't completed, and the cylinder isn't locked. Complete the turning phase and apply the switching pressure. On ploughs with a memory system, any adjustment of the working width should be carried out using the vari-width lever, not the turnover lever.
Details the placement and importance of safety decals on the plough for user protection.
Provides essential safety guidelines for operating, maintaining, and working around the plough.
Presents detailed technical data, including model variations, dimensions, and power requirements.
Explains how to adjust the plough's working width in incremental steps.
Details the procedure for adjusting the infinitely variable working width.
Guides on how to set the first furrow width correctly for optimal ploughing.
Describes how to adjust the plough's working depth using the depth wheel and controls.
Explains how to ensure the plough beams are perpendicular to the ground for even ploughing.
Warns about risks during turning and ploughing on slopes.
Lists essential checks and preparations before starting the ploughing operation.
Provides a schedule for various maintenance operations and their intervals.
Details the procedure and frequency for lubricating the plough's moving parts.
Highlights safety precautions when parking and storing the plough to prevent accidents.
Addresses common problems related to the plough's turning mechanism and their solutions.
Covers issues related to plough operation, such as furrow width and levelling, and their fixes.
Summarizes essential checks for tractor, mounting, operation, maintenance, and storage.
General| Brand | Kverneland |
|---|---|
| Model | 150 B |
| Category | Farm Equipment |
| Language | English |
To Next Page