How to troubleshoot a Kverneland 150 S plough that won't turn on?
If your Kverneland Farm Equipment plough isn't turning, it might be due to incorrectly mounted connections to the tractor. Ensure that the quick-couplings are properly engaged and correctly connected, paying attention to the color coding on the hoses.
Why is the first furrow width different on my Kverneland 150 S plough?
If the first furrow width on your Kverneland Farm Equipment is inconsistent when ploughing on the left and right sides, the issue could stem from a few factors. First, ensure that the cross shaft is positioned centrally on the turning head. Also, verify that the air pressure in the tractor’s rear tires is equal. Finally, check and adjust the sideways leveling.
What to do if turning is slow on my Kverneland Farm Equipment plough?
If turning is slow or incomplete on your heavy Kverneland Farm Equipment plough, the cause might be incorrect oil flow. Try adjusting the motor speed or flow rate on the tractor valve to see if different oil flow rates affect the turning. Turning valves operate best at 25-35 l/min. A high flow rate can return pressure and lead to reduced turning performance.
What to do if my Kverneland 150 S plough stops halfway through turning?
If your Kverneland Farm Equipment plough turns halfway and stops, or returns to its original position, it could be due to the restrictor being mounted in the wrong port. Try changing the position of the restrictor. Alternatively, the switching pressure may be incorrect; in this case, try increasing or reducing the switching pressure.
Why does my Kverneland 150 S Farm Equipment plough stop turning during the first cycle?
If the turning stops in the first turning cycle with a Kverneland Farm Equipment plough with Packomat, or when turning the plough with the bodies under the main frame, it could be that the switch-over takes place prematurely, just before dead center is reached. Increase the switching pressure by a couple of turns clockwise and ensure that the restrictor in the turning cylinder is correctly positioned.
Why is my Kverneland 150 S plough vibrating during turning?
If you are experiencing vibrations during turning with your Kverneland Farm Equipment plough, the restrictor might be mounted in the wrong port. Try changing its position to resolve the issue.
Why does the turning cylinder creep on my Kverneland 150 S plough?
If the turning or folding-in cylinder creeps during ploughing or transport with your Kverneland Farm Equipment plough, it could be because the turning phase isn't completed, and the cylinder isn't locked. Complete the turning phase and apply the switching pressure. On ploughs with a memory system, any adjustment of the working width should be carried out using the vari-width lever, not the turnover lever.
Details safety decals on the plough and advises on their maintenance and replacement.
Provides essential general safety guidelines for operating and maintaining the plough.
Highlights safety risks and precautions specifically related to coupling the plough to the tractor.
Provides crucial safety instructions for transporting the plough on public roads, including speed limits.
Defines the intended purpose of the plough and warns against improper use.
Illustrates and labels the main components of the 150 Series plough models.
Lists detailed technical specifications for different models, including dimensions and weight.
Guides on preparing the tractor: hydraulic connections, depth control, wheel distance, tyre pressure, front weights.
Details the step-by-step process for coupling the plough to the tractor, including linkage and hydraulics.
Covers safety aspects and preparation steps before transporting the plough.
Details the procedure for placing the plough into the transport position.
Explains how to return the plough from transport to the ploughing position.
Explains how to adjust the working width in increments for the 150 Series plough.
Details the adjustment procedures for infinitely variable working width (Variomat).
Highlights safety precautions before performing maintenance, including securing the plough.
Details the correct grease to use and the procedure for lubricating all lubrication points.
Provides torque specifications for bolts, nuts, and hydraulic connections.
Details shear bolt replacement and spring length checks for the auto-reset system.
Addresses common problems with the plough's turning system, such as failure to turn or stopping midway.
General| Brand | Kverneland |
|---|---|
| Model | 150 S |
| Category | Farm Equipment |
| Language | English |
To Next Page