To Next PageTo Next Page
Need help?Do you have a question about the Kverneland 2632M and is the answer not in the manual?
Identifies safety labels on the machine for US and Canadian markets and their meanings.
Illustrates various safety labels found on the machine and their corresponding locations.
Provides detailed explanations for common safety symbols and warnings on the machine.
Covers initial setup including lift arms, crossbar, and stabilizer chains for attachment.
Instructions for checking and adjusting the PTO shaft length for proper connection.
Steps for attaching the machine to the tractor's lift arms and top link.
Procedures for setting the machine to transport position and ensuring safety.
Instructions for operating the machine in the field and performing headland turns.
Details on adjusting the suspension for optimal cutting performance.
Guidelines for mowing on slopes, including upward and downward cutting.
Steps for safely parking and disconnecting the machine from the tractor.
Lists recommended lubricants and torque specifications for various components.
Provides a schedule for routine maintenance tasks based on usage hours.
Identifies common faults with the cutterbar and PTO, and their remedies.
Addresses issues related to the PTO shaft, such as knocking, and their solutions.
General| Number of rotors | 2 |
|---|---|
| Tines per arm | 2 |
| Tyre dimensions | 16x6.50-8 |
| Working width | 3.2 m |
| Required hydraulic outlets | 1 |
