Kverneland Vicon PS225 - User Manual

PS 225/ 403/ 403-VITI/
PS604/ PS754
User's manual
Edition 12.2017
Date of printing 12.2017
Language EN
Machine number 1001
Type VN216/ VN202/ VN203/ VN204
Document Number VN7005132-1

Summary

Safety

For Your Safety

General safety advice and employer responsibilities for safe operation and protective gear.

Warning Stickers

Explains the importance of safety stickers and their maintenance to prevent hazards.

Safety Regulations

Details requirements, prohibitions, and safety measures for machine usage, maintenance, and repair.

Intended Use

Specifies the machine's intended purpose and defines irregular applications.

Getting Familiar With The Machine

Applications of the Machine

Describes the machine's suitability for spreading various materials and its attachment to tractors.

SuperFlow Spreading System

Explains the pendulum spreader's symmetrical spreading and regulation by a dosing plate.

Adjustments

Details how to set application rate and working width independently.

Technical Specifications

Provides detailed specifications for different models, including capacity, dimensions, and working width.

Assembly Instruction

Inspection of the Supplied Machine

Outlines parts of the spreader and responsibilities for providing documentation.

General

Covers unpacking, assembling accessories, and using correct parts and equipment.

Assembly PS225-335

Provides step-by-step assembly instructions specific to the PS225-335 model.

PS403-503 Assembly Order

Details assembly order and building the spreading unit for PS403-503 models.

PS604-1654 Assembly Order

Lists assembly order and components for PS604-1654 models.

Before First Use

Tractor Provisions

Lists tractor requirements such as power lift, hydraulic valves, and stabiliser rods.

Mounting the Coupling Shaft

Provides instructions for correctly mounting and checking the coupling shaft length.

Setting the Safety Clutch

Details how to check and set the safety clutch pressure springs.

Hitching to the Tractor

Connecting and Disconnecting Safely

Outlines safety procedures and precautions for connecting and disconnecting the machine.

Check the Coupling Shaft

Lists points to check on the coupling shaft before attaching the PTO shaft.

Connecting the Machine

Describes the process of connecting the machine, including positioning and securing components.

To Be Done Before Spreading

Online Spreading Chart Service

Guides users on using the online service for setting up the spreader based on fertilizer type.

Finding the Correct Setting for Your Spreading Work

Explains the 6-step method for determining the correct spreader settings.

Setting the Spreader

Instructs on setting the regulating rod for correct application rate and other adjustments.

Calibration Test

Outlines the necessity and procedure for performing a calibration test to check settings.

Use on the Land

Adjusting the Machine

Explains how to adjust the machine for proper operation, including spreading height and levelling.

Set Driving Paths

Provides guidance on setting tramlines to ensure proper overlap and prevent driving mistakes.

Border Spreading

Explains concentration for border spreading, environmental standards, and three methods.

Maintenance

Maintenance Intervals

Presents a schedule for inspection, lubrication, and replacement of parts.

Lubricate With Oil and Grease

Details specific lubrication points and quantities for the coupling shaft and spreading unit.

Checking the Hydraulic System

Provides instructions and safety precautions for checking hydraulic system components for leaks.

Accessories

General

Mentions available accessories and the consequence of using non-genuine parts.

Hydraulic Operation

Describes the hydraulic operation system and its advantages.

PS-ED II Electronic Dosing System

Explains the PS-ED II system for automatic dosing adjustment and data logging.

Border-Spreading Cylinder

Describes the border-spreading cylinder as a simple solution for border spreading.

Border Spreading Plate

Explains how to perform one-sided boundary spreading using the border spreading plate.

Kverneland Vicon PS225 Specifications

General

Brand	Kverneland
Model	Vicon PS225
Category	Farm Equipment
Language	English