To Next Page
J
johncobbNov 3, 2025
Why are my Kverneland Vicon PS403 Farm Equipment application rates incorrect?
- SSteven SalazarNov 3, 2025
Incorrect application rates with your Kverneland Farm Equipment can stem from several causes. First, the dosing setting might be off, so ensure it's set according to the instructions. A calibration test might be needed to verify the setting. Fine dosage settings could also be misconfigured, so double-check those. Your driving speed could be too high or low, so adjust accordingly, or adjust the application rate. Verify the distance between driving tracks, setting them before spreading. Remember that fertiliser quality varies, so determine the characteristics of the fertiliser, consult the relevant spreading chart, and reset the spreader. A blocked fertiliser flow can be the culprit, so clean the machine after each use and replace a worn agitator. Finally, average quality fertiliser or incor...
General
