6
Using the Tri-Sat AutoSwitch
This section explains how to operate the
TracVision system with the Tri-Sat AutoSwitch
installed.
Switching Satellites
When the Tri-Sat AutoSwitch is coupled with a
DIRECTV H21-200 or DIRECTV H20-600
receiver, the antenna automatically switches
among the Ku-band portion of the DIRECTV 101,
110, and 119 satellites as the user changes
channels using the receiver’s remote control.
NOTE: The receiver might take up to 30 seconds to
display video when changing channels, switching
between satellites, and/or switching between
standard-definition and high-definition channels.
TIP: For your convenience, KVH lists the DIRECTV
Ku-band HDTV channels, and the DIRECTV
satellites that carry them, on the web at
www.kvh.com/HDTV. Since DIRECTV changes its
channel lineups frequently, KVH can e-mail updates
to you whenever the HDTV lineup changes. Register
for this free service when you visit the website for the
first time.
To Next Page
Loading...
Need help?
General
