Need help?Do you have a question about the KVH Industries TV3 and is the answer not in the manual?
General| Brand | KVH Industries |
|---|---|
| Model | TV3 |
| Category | Antenna |
| Language | English |
Verify all components and gather necessary tools for installation.
Determine optimal placement for antenna and TV-Hub, considering vessel structure and conditions.
Drill mounting holes and cable access points, and prepare RF cables for connection.
Connect RF cables to the antenna and securely mount it to the surface.
Remove antenna restraints and install the TV-Hub unit in its designated location.
Connect RF cables from the antenna to the TV-Hub and then to the satellite receivers.
Integrate NMEA device for GNSS data and establish network connection for system access.
Configure Wi-Fi security and ensure proper vessel grounding and DC power connection.
Power on the system, verify status, and use the Setup Wizard for initial configuration.
Adjust the LNB skew angle for optimal linear satellite reception.
Explain system operation, troubleshooting, and registration to the end-user.
Detailed diagrams illustrating various system configurations and connections.
Instructions for integrating IP AutoSwitches for satellite switching.
To Next Page
