－－31－－31
(
5)FUSE CHANGE
(
5)FUSE CHANGE
Be careful not to excessively expand the fuse clip during
removal.
After a new fuse is installed,check the fuse clip for
looseness which is the main cause of trouble.
Never use fuse of unspecified capacity,it may cause wire
overheating and burning out.
When replacing electric appliances(lights,instruments),
be sure to use the recommended genuine parts.
When washing the motorcycle,avoid flushing it.
If the cause can not be found,contact our distributor or
service station for inspection
Be
careful not to excessively expand the fuse clip during
removal.
After
a new fuse is installed,check the fuse clip for
looseness
which is the main cause of trouble.
Never
use fuse of unspecified capacity,it may cause wire
overheating
and burning out.
When
replacing electric appliances(lights,instruments),
be
sure
to use the recommended genuine parts.
When
washing the motorcycle,avoid flushing it.
If
the cause can not be found,contact our distributor or
service
station for inspection
CAUTION:
Turn off the main switch and check if the fuse is burned
out.
When the fuse is burned out,replace with a specifisd fuse.
Check for the cause of breakdown before replacing.
Ignition switch fuse specification:7A
Turn
off the main switch and check if the fuse is burned
out.
When
the fuse is burned out,replace with a specifisd fuse.
Check
for the cause of breakdown before replacing.
Ignition
switch fuse specification:7A
ＫＬ ＭFuse Box Fuse clip FuseＫＬ ＭFuse Box Fuse clip Fuse
Ｋ
Ｌ
Ｍ
Ｌ
Ｋ
To Next Page