KYMCO Agility City 50 User Manual

⌒17⌒⌒17⌒
(11) FRONT/REAR SHOCK ABSORBER INSPECTION
Check the condition of the front/rear shock absorbers by
pressing down on the handlebar and seat several times.
(12) BRAKE PERFORMANCE INSPECTION
Fully apply the front and rear brake lever pedal and move
the motorcycle forward to see if the braking effect is good.
(13) REAR MIRROR ANGLE CHECK
Sit on the motorcycle uprightly and make a viewing test
of the rear mirror angle.
(14) LICENSE PLATE CHECK
Check the license plate for dirt and damage, then tighten it.
(15) REFLECTOR CHECK
Check the reflector for dirt and damage.
(16) PREVIOUS ABNORMAL PARTS INSPECTION
Make sure that the previous abnormal parts are repaired.
(17) LUBRICATION POINT CHECK
Visually check if all motorcycle lubrication points are
lubricated properly.
(11) FRONT/REAR SHOCK ABSORBER INSPECTION
Check the condition of the front/rear shock absorbers by
pressing down on the handlebar and seat several times.
(12) BRAKE PERFORMANCE INSPECTION
Fully apply the front and rear brake lever pedal and move
the motorcycle forward to see if the braking effect is good.
(13) REAR MIRROR ANGLE CHECK
Sit on the motorcycle uprightly and make a viewing test
of the rear mirror angle.
(14) LICENSE PLATE CHECK
Check the license plate for dirt and damage, then tighten it.
(15) REFLECTOR CHECK
Check the reflector for dirt and damage.
(16) PREVIOUS ABNORMAL PARTS INSPECTION
Make sure that the previous abnormal parts are repaired.
(17) LUBRICATION POINT CHECK
Visually check if all motorcycle lubrication points are
lubricated properly.

KYMCO Agility City 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Fuel Capacity	6.5 liters
Seat Height	810 mm
Ignition	CDI
Starter	Electric & Kick
Length	2, 050 mm
Width	735 mm
Wheelbase	1, 340 mm
Engine Type	4-stroke, SOHC
Transmission	CVT
Rear Suspension	Single shock