KYMCO Bet & Win 250 User Manual

2. EXHAUST MUFFLER/FRAME COVERS
2-5
Bet & Win 2 50
FRONT UPPER COVER REMOVAL
Remove the four screws on the back of the
front upper cover.
Remove the front upper cover.
The installation sequence is the reverse of
removal.
FRONT LOWER COVER REMOVAL
First remove the front upper cover.
Remove the two screws attaching the front
lower cover.
Remove the four screws on the back of the
front lower cover.
Disconnect the right/left turn signal light wire
connectors.
Remove the front lower cover
The installation sequence is the reverse of
removal.
BACK COVER REMOVAL
Remove the front cover.
Remove the key moldings.
Remove the fuel cap moldings.
Remove the back cover bolt.
Remove the screws attaching fuel tank inlet
tube join.
Remove the back cover.
Screws
Screws
Bolt
Key Moldings
Screws
Fuel Cap Moldings
Fuel Tank Inlet Tube
Breather Tube
Screws
Screws
www.PlanDeGraissage.org

KYMCO Bet & Win 250 Specifications

General

Displacement	249.4 cc
Cooling System	Liquid-cooled
Fuel System	Carburetor
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Fuel Capacity	12 liters
Ignition	CDI
Width	770 mm
Height	1, 370 mm
Seat Height	780 mm
Engine Type	4-stroke, single-cylinder