ADJUSTING THE SCOOTER
Push the locking lever –to lock
Pull the locking lever –to unlock
Lowering the headrest:
Press the locking lever in and push the headrest down
to the desired position.
Release the locking lever, and engage the lowering
protection by moving the headrest slightly.
7.5 ADJUSTING THE TILLER ANGLE
Always adjust the tiller so that
you can reach the dashboard and
control your scooter easily at any
time.
1. Pull the locking lever (1).
2. Push the tiller forwards
or backwards to the desired
position(2).
3. Release the locking lever knob.
4. Ensure that the tiller is
engaged correctly by trying to
move it backwards and forwards.
Accident hazard due to
non-engaged tiller:
Ensure that the tiller is properly
locked after adjustment by seeing that it doesn’t move
when you try pushing it slightly forwards and backwards.
7.6 ADJUSTING THE SEAT BELT FOR
LENGTH AND FITTING
Adjusting for length:
Release the belt buckle clasp. Adjust the seat belt
length by pulling on the loose end of the strap.
Closing the seat belt:
Press the seat belt tab into the clasp until it audibly
locks in place.
7.7 TURNING THE SEAT
The seat can be turned to both sides, and firmly
21
To Next Page
Loading...
Need help?
General
