EasyManuals Logo

KYMCO MAXER User Manual

KYMCO MAXER
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
BATTERY AND CHARGING THE BATTERY
9.1 BATTERY STATUS DISPLAY
The battery status display on the dashboard shows
the current level of
battery power.
F = max range
E = decreased driving
range, charge batteries
as soon as possible.
If the scooter is at a standstill, it is often the case
that the battery status may show full than it actually
is. The battery status display may vary greatly while
the vehicle is travelling depending on the load.
If the vehicle is under a heavier load, such as fast
acceleration or driving up inclines, the battery status
display may move towards the empty zone.
This may not indicate the actual status of the batteries.
After a journey, the battery status display may move
towards the full zone after the scooter has been
turned off for a long period of time.
If a battery status display is in the empty zone at the
end of a journey, the battery must be charged
immediately. Otherwise, it can
lead to battery damage.
When the LCD shows only 3
spaces of charge units left
1. At switch off, the system will send out 5 long
recharge warning sounds. Then power cuts off.
2. When you switch on, the system will send out 3
short recharge warning sounds.
32

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO MAXER and is the answer not in the manual?

KYMCO MAXER Specifications

General IconGeneral
TransmissionCVT
Front SuspensionTelescopic fork
Tires (Front)120/70-12
Tires (Rear)130/70-12
Seat Height780 mm
Max Torque3.2 Nm @ 6500 rpm
Starting SystemElectric
Front BrakeDisc
Rear BrakeDrum
Length1920 mm

Related product manuals