8.11 SWITCHING ON THE
TEMP
Press the temp button.
It will be change the temperature unit
of measure.
8.12 SWITCHING ON THE ADJ
Press the ADJ button.
Hold the ADJ button.
1. set value
2. change speed unit.(km/h or mph)
Hold the ADJ and MOD button about 3
seconds.
The value returns zero.(in TRIP mode)
8.13 SWITCHING ON THE MOD
Press the MOD button.
Hold the MOD button about 0.5 seconds
to repeat CLOCK-> ODO -> TRIP.
8.14 SWITCHING ON THE TIME
Press the TIME button
1. Change between AM/PM display
2. Enter set clock mode /exit set clock
mode
8.15 POWERING
OFF/PARKING THE SCOOTER
Turn the key to the left to switch the
scooter off.
Always turn the scooter off using the
key if you:
- want to get on or off.
29
To Next Page
Loading...
